The Gantry features a fixed table and moving head designed for cutting very large, heavy material. This machine allows for vertical, horizontal, and angle cuts without having to move the material; ideal for ingots and forgings as well as large blocks of aluminum.
Typical use would be to cut strips from large blocks, to rough out holds to vastly reduce machining time, and most recently rough out frac blocks prior to machining.
The flexibility of the moving head and rotating blade guides, along with the 360 turntable, you can easily make up to 9 cuts with a single set-up.
2100X1100X4000 | |
Cutting capacity (mm) | 2100x1100 |
Head stroke (mm) | 4000 |
Blade dimension (mm) | 16.760x54x1,6 |
Blade speed ( m/min) |
300÷3000 |
Blade motor power ( Kw ) | 51 |
weight ( Kg ) | 29.000 |
2600X1100X4000 |
|
Cutting capacity (mm) | 2600x1100 |
Head stroke (mm) | 4000 |
Blade dimension (mm) | 19.400x54x1,6 |
Blade speed ( m/min) |
300÷3000 |
Blade motor power ( Kw ) | 51 |
weight ( Kg ) | 34.000 |
HIGH LIGHTS |
Excellent cut piece |
Tight tolerances |
Heavy-duty vices |
Precise material alignment |
Rised table support for an easy loading operation |
Dry cut |
AVAILABLE TECHNOLOGIES






